'Node - was compiled against a different Node.js version using NODE_MODULE_VERSION 51

I am running a node application on terminal. Have recently upgraded to node v8.5.0, but am getting this error:

Error: The module '/tidee/tidee-au/packages/tidee-au-server/node_modules/bcrypt/lib/binding/bcrypt_lib.node'
was compiled against a different Node.js version using
NODE_MODULE_VERSION 51. This version of Node.js requires
NODE_MODULE_VERSION 57. Please try re-compiling or re-installing
the module (for instance, using `npm rebuild` or `npm install`).
    at Object.Module._extensions..node (module.js:653:18)
    at Module.load (module.js:545:32)
    at tryModuleLoad (module.js:508:12)
    at Function.Module._load (module.js:500:3)
    at Module.require (module.js:568:17)
    at require (internal/module.js:11:18)
    at Object.<anonymous> (/tidee/tidee-au/packages/tidee-au-server/node_modules/bcrypt/bcrypt.js:6:16)
    at Module._compile (module.js:624:30)
    at Module._extensions..js (module.js:635:10)
    at Object.require.extensions.(anonymous function) [as .js] (/tidee/tidee-au/packages/tidee-au-server/node_modules/babel-register/lib/node.js:152:7)
    at Module.load (module.js:545:32)
    at tryModuleLoad (module.js:508:12)
    at Function.Module._load (module.js:500:3)
    at Module.require (module.js:568:17)
    at require (internal/module.js:11:18)
    at Object.<anonymous> (/tidee/tidee-au/packages/tidee-au-server/server/helpers/encryptPass.js:1:16)

Any idea how to solve this?

Solution 1:^[1]

You need to remove the module folder (bcrypt) from the node_modules folder and reinstall it, use the following commands:

$ rm -rf node_modules/bcrypt
$ npm install
// or
$ yarn

Solution 2:^[2]

I had the same problem and nothing mentioned here worked for me. Here is what worked for me:

Require all dependencies you need in the main.js file that is run by electron. (this seemed to be the first important part for me)
Run npm i -D electron-rebuild to add the electron-rebuild package
Remove the node-modules folder, as well as the packages-lock.json file.
Run npm i to install all modules.
Run ./node_modules/.bin/electron-rebuild (.\node_modules\.bin\electron-rebuild.cmd for Windows) to rebuild everything

It is very important to run ./node_modules/.bin/electron-rebuild directly after npm i otherwise it did not work on my mac.

Solution 3:^[3]

You have to rebuild the package and tell npm to update it's binary too. Try:

npm rebuild bcrypt --update-binary

@robertklep answered a relative question with this command, look.

Only rebuild haven't solved my problem, this works fine in my application.

Solution 4:^[4]

Simply run:

npm uninstall bcrypt

Followed by:

npm install bcrypt (or npm install, if bcrypt is declared as dependency in your package.json file)

Solution 5:^[5]

Be sure you only have one version of NodeJS installed. Try these two:

node --version
sudo node --version

I initially installed NodeJS from source, but it was the incorrect version and 'upgraded' to the newest version using nvm, which doesn't remove any previous versions, and only installs the desired version in the /root/.nvm/versions/... directory. So sudo node was still pointing to the previous version, whilst node was pointing to the newer version.

Solution 6:^[6]

you can see this link

to check your node verison right. using NODE_MODULE_VERSION 51 means that your node version is nodejs v7.x, requires NODE_MODULE_VERSION 57 means you need upgrade your node to v8.x,so you need to upgrade your node. and then you need run npm rebuild command to rebuild your project

Solution 7:^[7]

Most likely you have this issue due to the package-lock.json. Somehow it seems to block you from recompiling or rebuilding your dependencies, even if you explicitly run npm rebuild. I ran all the following to fix it for me:

rm package-lock.json;
rm -rf node_modules;
npm install;

Solution 8:^[8]

I deleted the node_modules folder and run npm install and my application started without any errors.

Solution 9:^[9]

I got the same error but I was trying to run a node application using a Docker container.

I fixed it by adding a .dockerignore file to ignore the node_modules directory to make sure that when the docker image builds, it builds the native packages for the image I wanted (Alpine) instead of copying over the node_modules compiled for my host (Debian).

Solution 10:^[10]

Turns out my problem was user-error: make sure the version of node you are using for running is the same that you are using when running an npm install or yarn.

I use NVM for versioning node and was running yarn via a terminal, but my IDE was set to use an older version of node when running and it was throwing the error above. Matching my IDE's version of node in the run config to node --version fixed the issue.

Solution 11:^[11]

Here is what worked for me. I am using looped-back node module with Electron Js and faced this issue. After trying many things following worked for me.

In your package.json file in the scripts add following lines:

  ... 
"scripts": {
        "start": "electron .",
        "rebuild": "electron-rebuild"
    
      },
...

And then run following command npm run rebuild

Solution 12:^[12]

I got this error when running my app with systemd:

ExecStart=/usr/local/bin/node /srv/myapp/server.js

But I was using a different version for npm install in the shell:

$ which node
/home/keith/.nvm/versions/node/v8.9.0/bin/node

If this is your setup, you can either hardcode the node version in the service file or follow a workaround like this one.

Solution 13:^[13]

you need just run this below commands:

$ rm -rf node_modules
$ rm -rf yarn.lock
$ yarn install

and finally

$ ./node_modules/.bin/electron-rebuild

don't forget to yarn add electron-rebuild if it doesn't exist in your dependencies.

Solution 14:^[14]

For Electron modules, install electron-rebuild.

Format:
electron-rebuild -o <module_name> -v <electron version>

Example:
electron-rebuild -o myaddon -v 9.0.0-beta.6

Specify the same version that you have installed in the current directory

You might have this experience where a standard node-gyp build would report as 64, then a basic electron-rebuild would report 76, not until you add -v with exact version it bumps to actual version 80 (for 9.0.0-beta.6)

Solution 15:^[15]

I had a similar problem with robotjs. There were some deprecated code that required node v11, but I had already compiled electron code on v12. So I got basically the same error. Nothing here worked as I was basically trying to rebuild electron and my other dependencies into node v11 from v12.

Here is what I did (part of this is based on chitzui's answer, credit where credit is due):

Back up package.json
completely delete the node_modules folder
completely delete package_lock.json
delete package.json (will reinit later)
Close any open editors and other cmd windows that are in the project's directory.
run npm init to reinit package, then missing data with old backed up package.json
run npm i
fixed

Solution 16:^[16]

After trying different things. This worked.

Delete your node modules folder and run

npm i

Solution 17:^[17]

I faced the same issue with grpc module and in my case, I was using electron and have set a wrong electron version in the env variable "export npm_config_target=1.2.3", setting it to the electron version I am using resolved the issue on my end. Hope this helps someone who set env variables as given here (https://electronjs.org/docs/tutorial/using-native-node-modules#the-npm-way)

Solution 18:^[18]

You could remove bcrypt entirely and install bcryptjs. It is ~30% slower, but has no dependencies, so no pains installing it.

npm i -S bcryptjs && npm uninstall -S bcrypt

We've installed it successfully for our applications. We had issues with bcrypt not compiling on AWS instances for Node v8.x

Solution 19:^[19]

Potentially, inconsistency of the node JS versions is what causes the problem. As stated in the documentation. Be sure to use one of the lts release. E.g. specify this in your Dockerfile:

# Pull lts from docker registry
FROM node:8.12.0

# ...

Solution 20:^[20]

Check the Node version you're using, might be a mismatch between what it is expected.

Solution 21:^[21]

I had the same problem and none of these solutions worked and I don't know why, they worked for me in the past for similar problems.

Anyway to solve the problem I've just manually rebuild the package using node-pre-gyp

cd node_modules/bcrypt
node-pre-gyp rebuild

And everything worked as expected.

Hope this helps

Solution 22:^[22]

I just got this error running kadence the installed "kadence" script checks for nodejs first and only runs node if there is no nodejs. I have the latest version of node linked into my ~/bin directory but nodejs runs an older version that I had forgotten to uninstall but never caused problems until just now.

So people with this problem might check if node and nodejs actually run the same version of node...

Solution 23:^[23]

In my case, I was in my office proxy which was skipping some of the packages. When I came out of my office proxy and tried to do npm install it worked. Maybe this helps for someone.

But it took me several hours to identify that was the reason.

Solution 24:^[24]

In my case I was running nodejs instead of node. Due to nodejs being installed by the package manager:

# which node
/home/user/.nvm/versions/node/v11.6.0/bin/node

# which nodejs
/usr/bin/nodejs

Solution 25:^[25]

run npm config set python python2.7 and run npm install again the party is on.

Solution 26:^[26]

I have hit this error twice in an electron app and it turned out the problem was that some modules need to be used from the main process rather than the render process. The error occurred using pdf2json and also node-canvas. Moving the code that required those modules from index.htm (the render process) to main.js (the main process) fixed the error and the app rebuilt and ran perfectly. This will not fix the problem in all cases but it is the first thing to check if you are writing an electron app and run into this error.

Solution 27:^[27]

I came here because I was getting this error for the quokka.js ext in vscode.

My solution: (on a mac via the terminal)

1- I went to ~/.quokka

2- I ran nano config.json

3- I copied the code from config.json into a separate file

4- I deleted the code in config.json

5- I stopped and restarted Quokka.

6- Once I confirmed that Quokka was working without errors, I deleted the config.json file code.

Solution 28:^[28]

this is occoures because you currently change your node js version, just run in terminal in your project

$ rm -rf node_modules/bcrypt

then reinstall

$ npm install

you can start it. ok

Sources

This article follows the attribution requirements of Stack Overflow and is licensed under CC BY-SA 3.0.

Source: Stack Overflow

Solution	Source
Solution 1	Gianfranco P.
Solution 2	Dharman
Solution 3	Dharman
Solution 4	Yaroslav
Solution 5	Barkles
Solution 6
Solution 7	George Linardis
Solution 8	Dushan
Solution 9	Matt
Solution 10	Craig Odell
Solution 11	sediq khan
Solution 12	Keith
Solution 13	Ehsan Barkhordar
Solution 14	tomm1e
Solution 15	Dharman
Solution 16	4b0
Solution 17	kohl
Solution 18	Daniel Nitu
Solution 19	kmos.w
Solution 20	cjjenkinson
Solution 21	wezzy
Solution 22	Bill Burdick
Solution 23	Balasubramanian S
Solution 24	benathon
Solution 25	Tebogo Mahlalela
Solution 26	Prajna
Solution 27	Dharman
Solution 28	gentur ariyadi

'Node - was compiled against a different Node.js version using NODE_MODULE_VERSION 51

Solution 1:[1]

Solution 2:[2]

Solution 3:[3]

Solution 4:[4]

Solution 5:[5]

Solution 6:[6]

Solution 7:[7]

Solution 8:[8]

Solution 9:[9]

Solution 10:[10]

Solution 11:[11]

Solution 12:[12]

Solution 13:[13]

Solution 14:[14]

Solution 15:[15]

Solution 16:[16]

Solution 17:[17]

Solution 18:[18]

Solution 19:[19]

Solution 20:[20]

Solution 21:[21]

Solution 22:[22]

Solution 23:[23]

Solution 24:[24]

Solution 25:[25]

Solution 26:[26]

Solution 27:[27]

Solution 28:[28]