Can modern x86 hardware not store a single byte to memory?

Question

Speaking of the memory model of C++ for concurrency, Stroustrup's C++ Programming Language, 4th ed., sect. 41.2.1, says:

... (like most modern hardware) the machine could not load or store anything smaller than a word.

However, my x86 processor, a few years old, can and does store objects smaller than a word. For example:

#include <iostream>
int main()
{
    char a =  5;
    char b = 25;
    a = b;
    std::cout << int(a) << "\n";
    return 0;
}

Without optimization, GCC compiles this as:

        [...]
        movb    $5, -1(%rbp)   # a =  5, one byte
        movb    $25, -2(%rbp)  # b = 25, one byte
        movzbl  -2(%rbp), %eax # load b, one byte, not extending the sign
        movb    %al, -1(%rbp)  # a =  b, one byte
        [...]

The comments are by me but the assembly is by GCC. It runs fine, of course.

Obviously, I do not understand what Stroustrup is talking about when he explains that hardware can load and store nothing smaller than a word. As far as I can tell, my program does nothing but load and store objects smaller than a word.

The thoroughgoing focus of C++ on zero-cost, hardware-friendly abstractions sets C++ apart from other programming languages that are easier to master. Therefore, if Stroustrup has an interesting mental model of signals on a bus, or has something else of this kind, then I would like to understand Stroustrup's model.

What is Stroustrup talking about, please?

LONGER QUOTE WITH CONTEXT

Here is Stroustrup's quote in fuller context:

Consider what might happen if a linker allocated [variables of char type like] c and b in the same word in memory and (like most modern hardware) the machine could not load or store anything smaller than a word.... Without a well-defined and reasonable memory model, thread 1 might read the word containing b and c, change c, and write the word back into memory. At the same time, thread 2 could do the same with b. Then, whichever thread managed to read the word first and whichever thread managed to write its result back into memory last would determine the result....

ADDITIONAL REMARKS

I do not believe that Stroustrup is talking about cache lines. Even if he were, as far as I know, cache coherency protocols would transparently handle that problem except maybe during hardware I/O.

I have checked my processor's hardware datasheet. Electrically, my processor (an Intel Ivy Bridge) seems to address DDR3L memory by some sort of 16-bit multiplexing scheme, so I don't know what that's about. It is not clear to me that that has much to do with Stroustrup's point, though.

Stroustrup is a smart man and an eminent scientist, so I do not doubt that he is taking about something sensible. I am confused.

See also this question. My question resembles the linked question in several ways, and the answers to the linked question are also helpful here. However, my question goes also to the hardware/bus model that motivates C++ to be the way it is and that causes Stroustrup to write what he writes. I do not seek an answer merely regarding that which the C++ standard formally guarantees, but also wish to understand why the C++ standard would guarantee it. What is the underlying thought? This is part of my question, too.

Answer 1

TL:DR: On every modern ISA that has byte-store instructions (including x86), they're atomic and don't disturb surrounding bytes. (I'm not aware of any older ISAs where byte-store instructions could "invent writes" to neighbouring bytes either.)

The actual implementation mechanism (in non-x86 CPUs) is sometimes an internal RMW cycle to modify a whole word in a cache line, but that's done "invisibly" inside a core while it has exclusive ownership of the cache line so it's only ever a performance problem, not correctness. (And merging in the store buffer can sometimes turn byte-store instructions into an efficient full-word commit to L1d cache.)

---

---

About Stroustrup's phrasing

I don't think it's a very accurate, clear or useful statement. It would be more accurate to say that modern CPUs can't load or store anything smaller than a cache line. (Although that's not true for uncacheable memory regions, e.g. for MMIO.)

It probably would have been better just to make a hypothetical example to talk about memory models, rather than implying that real hardware is like this. But if we try, we can maybe find an interpretation that isn't as obviously or totally wrong, which might have been what Stroustrup was thinking when he wrote this to introduce the topic of memory models. (Sorry this answer is so long; I ended up writing a lot while guessing what he might have meant and about related topics...)

Or maybe this is another case of high-level language designers not being hardware experts, or at least occasionally making mis-statements.

---

I think Stroustrup is talking about how CPUs work internally to implement byte-store instructions. He's suggesting that a CPU without a well-defined and reasonable memory model might implement a byte-store with a non-atomic RMW of the containing word in a cache line, or in memory for a CPU without cache.

Even this weaker claim about internal (not externally visible) behaviour is not true for high-performance x86 CPUs. Modern Intel CPUs have no throughput penalty for byte stores, or even unaligned word or vector stores that don't cross a cache-line boundary. AMD is similar.

If byte or unaligned stores had to do a RMW cycle as the store committed to L1D cache, it would interfere with store and/or load instruction/uop throughput in a way we could measure with performance counters. (In a carefully designed experiment that avoids the possibility of store coalescing in the store buffer before commit to L1d cache hiding the cost, because the store execution unit(s) can only run 1 store per clock on current CPUs.)

---

However, some high performance designs for non-x86 ISAs do use an atomic RMW cycle to internally commit stores to L1d cache. Are there any modern CPUs where a cached byte store is actually slower than a word store? The cache line stays in MESI Exclusive/Modified state the whole time, so it can't introduce any correctness problems, only a small performance hit. This is very different from doing something that could step on stores from other CPUs. (The arguments below about that not happening still apply, but my update may have missed some stuff that still argues that atomic cache-RMW is unlikely.)

(On many non-x86 ISAs, unaligned stores are not supported at all, or are used more rarely than in x86 software. And weakly-ordered ISAs allow more coalescing in store buffers, so not as many byte store instructions actually result in single-byte commit to L1d. Without these motivations for fancy (power hungry) cache-access hardware, word RMW for scattered byte stores is an acceptable tradeoff in some designs.)

---

Alpha AXP, a high-performance RISC design from 1992, famously (and uniquely among modern non-DSP ISAs) omitted byte load/store instructions until Alpha 21164A (EV56) in 1996. Apparently they didn't consider word-RMW a viable option for implementing byte stores, because one of the cited advantages for implementing only 32-bit and 64-bit aligned stores was more efficient ECC for the L1D cache. "Traditional SECDED ECC would require 7 extra bits over 32-bit granules (22% overhead) versus 4 extra bits over 8-bit granules (50% overhead)." (@Paul A. Clayton's answer about word vs. byte addressing has some other interesting computer-architecture stuff.) If byte stores were implemented with word-RMW, you could still do error detection/correction with word-granularity.

Current Intel CPUs only use parity (not ECC) in L1D for this reason. (At least some older Xeons could run with L1d in ECC mode at half capacity instead of the normal 32KiB, as discussed on RWT. It's not clear if anything's changed, e.g. in terms of Intel now using ECC for L1d). See also this Q&A about hardware (not) eliminating "silent stores": checking the old contents of cache before the write to avoid marking the line dirty if it matched would require a RMW instead of just a store, and that's a major obstacle.

It turns out some high-perf pipelined designs do use atomic word-RMW to commit to L1d, despite it stalling the memory pipeline, but (as I argue below) it's much less likely that any do an externally-visible RMW to RAM.

Word-RMW isn't a useful option for MMIO byte stores either, so unless you have an architecture that doesn't need sub-word stores for IO, you'd need some kind of special handling for IO (like Alpha's sparse I/O space where word load/stores were mapped to byte load/stores so it could use commodity PCI cards instead of needing special hardware with no byte IO registers).

As @Margaret points out, DDR3 memory controllers can do byte stores by setting control signals that mask out other bytes of a burst. The same mechanisms that get this information to the memory controller (for uncached stores) could also get that information passed along with a load or store to MMIO space. So there are hardware mechanisms for really doing a byte store even on burst-oriented memory systems, and it's highly likely that modern CPUs will use that instead of implementing an RMW, because it's probably simpler and is much better for MMIO correctness.

How many and what size cycles will be needed to perform longword transferred to the CPU shows how a ColdFire microcontroller signals the transfer size (byte/word/longword/16-byte line) with external signal lines, letting it do byte loads/stores even if 32-bit-wide memory was hooked up to its 32-bit data bus. Something like this is presumably typical for most memory bus setups (but I don't know). The ColdFire example is complicated by also being configurable to use 16 or 8-bit memory, taking extra cycles for wider transfers. But nevermind that, the important point is that it has external signaling for the transfer size, to tell the memory HW which byte it's actually writing.

---

Stroustrup's next paragraph is

"The C++ memory model guarantees that two threads of execution can update and access separate memory locations without interfering with each other. This is exactly what we would naively expect. It is the compiler’s job to protect us from the sometimes very strange and subtle behaviors of modern hardware. How a compiler and hardware combination achieves that is up to the compiler. ..."

So apparently he thinks that real modern hardware may not provide "safe" byte load/store. The people who design hardware memory models agree with the C/C++ people, and realize that byte store instructions would not be very useful to programmers / compilers if they could step on neighbouring bytes.

All modern (non-DSP) architectures except early Alpha AXP have byte store and load instructions, and AFAIK these are all architecturally defined to not affect neighbouring bytes. However they accomplish that in hardware, software doesn't need to care about correctness. Even the very first version of MIPS (in 1983) had byte and half-word loads/stores, and it's a very word-oriented ISA.

However, he doesn't actually claim that most modern hardware needs any special compiler support to implement this part of the C++ memory model, just that some might. Maybe he really is only talking about word-addressable DSPs in that 2nd paragraph (where C and C++ implementations often use 16 or 32-bit char as exactly the kind of compiler workaround Stroustrup was talking about.)

---

Most "modern" CPUs (including all x86) have an L1D cache. They will fetch whole cache lines (typically 64 bytes) and track dirty / not-dirty on a per-cache-line basis. So two adjacent bytes are pretty much exactly the same as two adjacent words, if they're both in the same cache line. Writing one byte or word will result in a fetch of the whole line, and eventually a write-back of the whole line. See Ulrich Drepper's What Every Programmer Should Know About Memory. You're correct that MESI (or a derivative like MESIF/MOESI) makes sure this isn't a problem. (But again, this is because hardware implements a sane memory model.)

A store can only commit to L1D cache while the line is in the Modified state (of MESI). So even if the internal hardware implementation is slow for bytes and takes extra time to merge the byte into the containing word in the cache line, it's effectively an atomic read modify write as long as it doesn't allow the line to be invalidated and re-acquired between the read and the write. (While this cache has the line in Modified state, no other cache can have a valid copy). See @old_timer's comment making the same point (but also for RMW in a memory controller).

This is easier than e.g. an atomic xchg or add from a register that also needs an ALU and register access, since all the HW involved is in the same pipeline stage, which can simply stall for an extra cycle or two. That's obviously bad for performance and takes extra hardware to allow that pipeline stage to signal that it's stalling. This doesn't necessarily conflict with Stroustrup's first claim, because he was talking about a hypothetical ISA without a memory model, but it's still a stretch.

On a single-core microcontroller, internal word-RMW for cached byte stores would be more plausible, since there won't be Invalidate requests coming in from other cores that they'd have to delay responding to during an atomic RMW cache-word update. But that doesn't help for I/O to uncacheable regions. I say microcontroller because other single-core CPU designs typically support some kind of multi-socket SMP.

---

Many RISC ISAs don't support unaligned-word loads/stores with a single instruction, but that's a separate issue (the difficulty is handling the case when a load spans two cache lines or even pages, which can't happen with bytes or aligned half-words). More and more ISAs are adding guaranteed support for unaligned load/store in recent versions, though. (e.g. MIPS32/64 Release 6 in 2014, and I think AArch64 and recent 32-bit ARM).

---

The 4th edition of Stroustrup's book was published in 2013 when Alpha had been dead for years. The first edition was published in 1985, when RISC was the new big idea (e.g. Stanford MIPS in 1983, according to Wikipedia's timeline of computing HW, but "modern" CPUs at that time were byte-addressable with byte stores. Cyber CDC 6600 was word-addressable and probably still around, but couldn't be called modern.

Even very word-oriented RISC machines like MIPS and SPARC have byte store and byte load (with sign or zero extension) instructions. They don't support unaligned word loads, simplifying the cache (or memory access if there is no cache) and load ports, but you can load any single byte with one instruction, and more importantly store a byte without any architecturally-visible non-atomic rewrite of the surrounding bytes. (Although cached stores can

I suppose C++11 (which introduces a thread-aware memory model to the language) on Alpha would need to use 32-bit char if targeting a version of the Alpha ISA without byte stores. Or it would have to use software atomic-RMW with LL/SC when it couldn't prove that no other threads could have a pointer that would let them write neighbouring bytes.

---

IDK how slow byte load/store instructions are in any CPUs where they're implemented in hardware but not as cheap as word loads/stores. Byte loads are cheap on x86 as long as you use movzx/movsx to avoid partial-register false dependencies or merging stalls. On AMD pre-Ryzen, movsx/movzx needs an extra ALU uop, but otherwise zero/sign extension is handled right in the load port on Intel and AMD CPUs.) The main x86 downside is that you need a separate load instruction instead of using a memory operand as a source for an ALU instruction (if you're adding a zero-extended byte to a 32-bit integer), saving front-end uop throughput bandwidth and code-size. Or if you're just adding a byte to a byte register, there's basically no downside on x86. RISC load-store ISAs always need separate load and store instructions anyway. x86 byte stores are no more expensive that 32-bit stores.

As a performance issue, a good C++ implementation for hardware with slow byte stores might put each char in its own word and use word loads/stores whenever possible (e.g. for globals outside structs, and for locals on the stack). IDK if any real implementations of MIPS / ARM / whatever have slow byte load/store, but if so maybe gcc has -mtune= options to control it.

That doesn't help for char[], or dereferencing a char * when you don't know where it might be pointing. (This includes volatile char* which you'd use for MMIO.) So having the compiler+linker put char variables in separate words isn't a complete solution, just a performance hack if true byte stores are slow.

---

PS: More about Alpha:

Alpha is interesting for a lot of reasons: one of the few clean-slate 64-bit ISAs, not an extension to an existing 32-bit ISA. And one of the more recent clean-slate ISAs, Itanium being another from several years later which attempted some neat CPU-architecture ideas.

From the Linux Alpha HOWTO.

When the Alpha architecture was introduced, it was unique amongst RISC architectures for eschewing 8-bit and 16-bit loads and stores. It supported 32-bit and 64-bit loads and stores (longword and quadword, in Digital's nomenclature). The co-architects (Dick Sites, Rich Witek) justified this decision by citing the advantages:

1. Byte support in the cache and memory sub-system tends to slow down accesses for 32-bit and 64-bit quantities.
2. Byte support makes it hard to build high-speed error-correction circuitry into the cache/memory sub-system.

Alpha compensates by providing powerful instructions for manipulating bytes and byte groups within 64-bit registers. Standard benchmarks for string operations (e.g., some of the Byte benchmarks) show that Alpha performs very well on byte manipulation.

Answer 2

Not only are x86 CPUs capable of reading and writing a single byte, all modern general purpose CPUs are capable of it. More importantly most modern CPUs (including x86, ARM, MIPS, PowerPC, and SPARC) are capable of atomically reading and writing single bytes.

I'm not sure what Stroustrup was referring to. There used to be a few word addressable machines that weren't capable of 8-bit byte addressing, like the Cray, and as Peter Cordes mentioned early Alpha CPUs didn't support byte loads and stores, but today the only CPUs incapable of byte loads and stores are certain DSPs used in niche applications. Even if we assume he means most modern CPUs don't have atomic byte load and stores this isn't true of most CPUs.

However, simple atomic loads and stores aren't of much use in multithreaded programming. You also typically need ordering guarantees and a way to make read-modify-write operations atomic. Another consideration is that while CPU a may have byte load and store instructions, compiler isn't required to use them. A compiler, for example, could still generate the code Stroustrup describes, loading both b and c using a single word load instruction as an optimization.

So while you do need a well defined memory model, if only so the compiler is forced to generate the code you expect, the problem isn't that modern CPUs aren't capable of loading or storing anything smaller than a word.

Answer 3

Not sure what Stroustrup meant by "WORD". Maybe it is the minimum size of memory storage of the machine?

Anyway not all machines were created with 8bit (BYTE) resolution. In fact I recommend this awesome article by Eric S. Raymond describing some of the history of computers: http://www.catb.org/esr/faqs/things-every-hacker-once-knew/

"... It used also to be generally known that 36-bit architectures explained some unfortunate features of the C language. The original Unix machine, the PDP-7, featured 18-bit words corresponding to half-words on larger 36-bit computers. These were more naturally represented as six octal (3-bit) digits."

Answer 4

The author seems to be concerned about thread 1 and thread 2 getting into a situation where the read-modify-writes (not in software, the software does two separate instructions of a byte size, somewhere down the line logic has to do a read-modify-write) instead of the ideal read modify write read modify write, becomes a read read modify modify write write or some other timing such that both read the pre-modified version and the last one to write wins. read read modify modify write write, or read modify read modify write write or read modify read write modify write.

The concern is to start with 0x1122 and one thread wants to make it 0x33XX the other wants to make it 0xXX44, but with for example a read read modify modify write write you end up with 0x1144 or 0x3322, but not 0x3344

A sane (system/logic) design just doesn't have that problem certainly not for a general purpose processor like this, I have worked on designs with timing issues like this but that is not what we are talking about here, completely different system designs for different purposes. The read-modify-write does not span a long enough distance in a sane design, and x86s are sane designs.

The read-modify-write would happen very near the first SRAM involved (ideally L1 when running an x86 in a typical fashion with an operating system capable of running C++ compiled multi-threaded programs) and happen within a few clock cycles as the ram is at the speed of the bus ideally. And as Peter pointed out this is considered to be the whole cache line that experiences this, within the cache, not a read-modify-write between the processor core and the cache.

The notion of "at the same time" even with multi-core systems isn't necessarily at the same time, eventually you get serialized because performance isn't based on them being parallel from beginning to end, it is based on keeping the busses loaded.

The quote is saying variables allocated to the same word in memory, so that is the same program. Two separate programs are not going to share an address space like that. so

You are welcome to try this, make a multithreaded program that one writes to say address 0xnnn00000 the other writes to address 0xnnnn00001, each does a write, then a read or better several writes of the same value than one read, check the read was the byte they wrote, then repeats with a different value. Let that run for a while, hours/days/weeks/months. See if you trip up the system...use assembly for the actual write instructions to make sure it is doing what you asked (not C++ or any compiler that does or claims it will not put these items in the same word). Can add delays to allow for more cache evictions, but that reduces your odds of "at the same time" collisions.

Your example so long as you insure you are not sitting on two sides of a boundary (cache, or other) like 0xNNNNFFFFF and 0xNNNN00000, isolate the two byte writes to addresses like 0xNNNN00000 and 0xNNNN00001 have the instructions back to back and see if you get a read read modify modify write write. Wrap a test around it, that the two values are different each loop, you read back the word as a whole at whatever delay later as you desire and check the two values. Repeat for days/weeks/months/years to see if it fails. Read up on your processors execution and microcode features to see what it does with this instruction sequence and as needed create a different instruction sequence that tries to get the transactions initiated within a handful or so clock cycles on the far side of the processor core.

EDIT

the problem with the quotes is that this is all about language and the use of. "like most modern hardware" puts the whole of the topic/text in a touchy position, it is too vague, one side can argue all I have to do is find one case that is true to make all the rest true, likewise one side could argue if I find one case the all of the rest is not true. Using the word like kind of messes with that as a possible get out of jail free card.

The reality is that a significant percentage of our data is stored in DRAM in 8 bit wide memories, just that we don't access them as 8 bit wide normally we access 8 of them at a time, 64 bits wide. In some number of weeks/months/years/decades this statement will be incorrect.

The larger quote says "at the same time" and then says read ... first, write ... last, well first and last and at the same time don't make sense together, is it parallel or serial? The context as a whole is concerned about the above read read modify modify write write variations where you have one writing last and depending on when that one read determines if both modifications happened or not. Not about at the same time which "like most modern hardware" doesn't make sense things that start off actually parallel in separate cores/modules eventually get serialized if they are aiming at the same flip-flop/transistor in a memory, one eventually has to wait for the other to go first. Being physics based I don't see this being incorrect in the coming weeks/months/years.

Answer 5

This is correct. An x86_64 CPU, just like an original x86 CPU, is not able to read or write anything smaller than an (in this case 64-bit) word from rsp. to memory. And it will not typically read or write less than a whole cache line, though there are ways to bypass the cache, especially in writing (see below).

In this context, though, Stroustrup refers to potential data races (lack of atomicity on an observable level). This correctness issue is irrelevant on x86_64, because of the cache coherency protocol, which you mentioned. In other words, yes, the CPU is limited to whole word transfers, but this is transparently handled, and you as a programmer generally do not have to worry about it. In fact, the C++ language, starting from C++11, guarantees that concurrent operations on distinct memory locations have well-defined behavior, i.e. the one you'd expect. Even if the hardware did not guarantee this, the implementation would have to find a way by generating possibly more complex code.

That said, it can still be a good idea to keep the fact that whole words or even cache lines are always involved at the machine level in the back of your head, for two reasons.

• First, and this is only relevant for people who write device drivers, or design devices, memory-mapped I/O may be sensitive to the way it is accessed. As an example, think of a device that exposes a 64-bit write-only command register in the physical address space. It may then be necessary to:
  • Disable caching. It is not valid to read a cache line, change a single word, and write back the cache line. Also, even if it were valid, there would still be a great risk that commands might be lost because the CPU cache is not written back soon enough. At the very least, the page needs to be configured as "write-through", which means writes take immediate effect. Therefore, an x86_64 page table entry contains flags that control the CPU's caching behavior for this page.
  • Ensure that the whole word is always written, on the assembly level. E.g. consider a case where you write the value 1 into the register, followed by a 2. A compiler, especially when optimizing for space, might decide to overwrite only the least significant byte because the others are already supposed to be zero (that is, for ordinary RAM), or it might instead remove the first write because this value appears to be immediately overwritten anyway. However, neither is supposed to happen here. In C/C++, the volatile keyword is vital to prevent such unsuitable optimizations.
• Second, and this is relevant for almost any developer writing multi-threaded programs, the cache coherency protocol, while neatly averting disaster, can have a huge performance cost if it is "abused".

Here's a – somewhat contrived – example of a very bad data structure. Assume you have 16 threads parsing some text from a file. Each thread has an id from 0 to 15.

// shared state
char c[16];
FILE *file[16];

void threadFunc(int id)
{
    while ((c[id] = getc(file[id])) != EOF)
    {
        // ...
    }
}

This is safe because each thread operates on a different memory location. However, these memory locations would typically reside on the same cache line, or at most are split over two cache lines. The cache coherency protocol is then used to properly synchronize the accesses to c[id]. And herein lies the problem, because this forces every other thread to wait until the cache line becomes exclusively available before doing anything with c[id], unless it is already running on the core that "owns" the cache line. Assuming several, e.g. 16, cores, cache coherency will typically transfer the cache line from one core to another all the time. For obvious reasons, this effect is known as "cache line ping-pong". It creates a horrible performance bottleneck. It is the result of a very bad case of false sharing, i.e. threads sharing a physical cache line without actually accessing the same logical memory locations.

In contrast to this, especially if one took the extra step of ensuring that the file array resides on its own cache line, using it would be completely harmless (on x86_64) from a performance perspective because the pointers are only read from, most the time. In this case, multiple cores can "share" the cache line as read-only. Only when any core tries to write to the cache line, it has to tell the other cores that it is going to "seize" the cache line for exclusive access.

(This is greatly simplified, as there are different levels of CPU caches, and several cores might share the same L2 or L3 cache, but it should give you a basic idea of the problem.)

Answer 6

Stroustrup is not saying that no machine can perform loads and stores smaller than their native word size, he is saying that a machine couldn't.

While this seems surprising at first, it's nothing esoteric.
For starter, we will ignore the cache hierarchy, we will take that into account later.
Assume there are no caches between the CPU and the memory.

The big problem with memory is density, trying to put more bits possible into the smallest area.
In order to achieve that it is convenient, from an electrical design point of view, to expose a bus as wider as possible (this favours the reuse of some electrical signals, I haven't looked at the specific details though).
So, in architecture where big memories are needed (like the x86) or a simple low-cost design is favourable (for example where RISC machines are involved), the memory bus is larger than the smallest addressable unit (typically the byte).

Depending on the budget and legacy of the project the memory can expose a wider bus alone or along with some sideband signals to select a particular unit into it.
What does this mean practically?
If you take a look at the datasheet of a DDR3 DIMM you'll see that there are 64 DQ0–DQ63 pins to read/write the data.
This is the data bus, 64-bit wide, 8 bytes at a time.
This 8 bytes thing is very well founded in the x86 architecture to the point that Intel refers to it in the WC section of its optimisation manual where it says that data are transferred from the 64 bytes fill buffer (remember: we are ignoring the caches for now, but this is similar to how a cache line gets written back) in bursts of 8 bytes (hopefully, continuously).

Does this mean that the x86 can only write QWORDS (64-bit)?
No, the same datasheet shows that each DIMM has the DM0–DM7 ,DQ0–DQ7 and DQS0–DQS7 signals to mask, direct and strobe each of the 8 bytes in the 64-bit data bus.

So x86 can read and write bytes natively and atomically.
However, now it's easy to see that this could not be the case for every architecture.
For instance, the VGA video memory was DWORD (32-bit) addressable and making it fit in the byte addressable world of the 8086 led to the messy bit-planes.

In general specific purpose architecture, like DSPs, could not have a byte addressable memory at the hardware level.

There is a twist: we have just talked about the memory data bus, this is the lowest layer possible.
Some CPUs can have instructions that build a byte addressable memory on top of a word addressable memory.
What does that mean?
It's easy to load a smaller part of a word: just discard the rest of the bytes!
Unfortunately, I can't recall the name of the architecture (if it even existed at all!) where the processor simulated a load of an unaligned byte by reading the aligned word containing it and rotating the result before saving it in a register.

With stores, the matter is more complex: if we can't simply write the part of the word that we just updated we need to write the unchanged remaining part too.
The CPU, or the programmer, must read the old content, update it and write it back.
This is a Read-Modify-Write operation and it is a core concept when discussing atomicity.

Consider:

/* Assume unsigned char is 1 byte and a word is 4 bytes */
unsigned char foo[4] = {};

/* Thread 0                         Thread 1                 */
foo[0] = 1;                        foo[1] = 2;

Is there a data race?
This is safe on x86 because they can write bytes, but what if the architecture cannot?
Both threads would have to read the whole foo array, modify it and write it back.
In pseudo-C this would be

/* Assume unsigned char is 1 byte and a word is 4 bytes */
unsigned char foo[4] = {};

/* Thread 0                        Thread 1                 */

/* What a CPU would do (IS)        What a CPU would do (IS) */
int tmp0 = *((int*)foo)            int tmp1 = *((int*)foo)

/* Assume little endian            Assume little endian     */
tmp0 = (tmp0 & ~0xff) | 1;         tmp1 = (tmp1 & ~0xff00) | 0x200;

/* Store it back                   Store it back            */
*((int*)foo) = tmp0;               *((int*)foo) = tmp1;

We can now see what Stroustrup was talking about: the two stores *((int*)foo) = tmpX obstruct each other, to see this consider this possible execution sequence:

int tmp0 = *((int*)foo)                   /* T0  */ 
tmp0 = (tmp0 & ~0xff) | 1;                /* T1  */        
int tmp1 = *((int*)foo)                   /* T1  */
tmp1 = (tmp1 & ~0xff00) | 0x200;          /* T1  */
*((int*)foo) = tmp1;                      /* T0  */
*((int*)foo) = tmp0;                      /* T0, Whooopsy  */

If the C++ didn't have a memory model these kinds of nuisances would have been implementation specific details, leaving the C++ a useless programming language in a multithreading environment.

Considering how common is the situation depicted in the toy example, Stroustrup stressed out the importance of a well-defined memory model.
Formalizing a memory model is hard work, it's an exhausting, error-prone and abstract process so I also see a bit of pride in the words of Stroustrup.

I have not brushed up on the C++ memory model but updating different array elements is fine.
That's a very strong guarantee.

We have left out the caches but that doesn't really change anything, at least for the x86 case.
The x86 writes to memory through the caches, the caches are evicted in lines of 64 bytes.
Internally each core can update a line at any position atomically unless a load/store crosses a line boundary (e.g. by writing near the end of it).
This can be avoided by naturally aligning data (can you prove that?).

In a multi-code/socket environment, the cache coherency protocol ensures that only a CPU at a time is allowed to freely write to a cached line of memory (the CPU that has it in the Exclusive or Modified state).
Basically, the MESI family of protocol use a concept similar to locking found the DBMSs.
This has the effect, for the writing purpose, of "assigning" different memory regions to different CPUs.
So it doesn't really affect the discussion of above.