'How to delete an element from a Slice in Golang
fmt.Println("Enter position to delete::")
fmt.Scanln(&pos)
new_arr := make([]int, (len(arr) - 1))
k := 0
for i := 0; i < (len(arr) - 1); {
if i != pos {
new_arr[i] = arr[k]
k++
i++
} else {
k++
}
}
for i := 0; i < (len(arr) - 1); i++ {
fmt.Println(new_arr[i])
}
I am using this command to delete an element from a Slice but it is not working, please suggest.
Solution 1:[1]
Order matters
If you want to keep your array ordered, you have to shift all of the elements at the right of the deleting index by one to the left. Hopefully, this can be done easily in Golang:
func remove(slice []int, s int) []int {
return append(slice[:s], slice[s+1:]...)
}
However, this is inefficient because you may end up with moving all of the elements, which is costly.
Order is not important
If you do not care about ordering, you have the much faster possibility to replace the element to delete with the one at the end of the slice and then return the n-1 first elements:
func remove(s []int, i int) []int {
s[i] = s[len(s)-1]
return s[:len(s)-1]
}
With the reslicing method, emptying an array of 1 000 000 elements take 224s, with this one it takes only 0.06ns.
This answer does not perform bounds-checking. It expects a valid index as input. This means that negative values or indices that are greater or equal to the initial len(s) will cause Go to panic.
Slices and arrays being 0-indexed, removing the n-th element of an array implies to provide input n-1. To remove the first element, call remove(s, 0), to remove the second, call remove(s, 1), and so on and so forth.
Solution 2:[2]
This is a little strange to see but most answers here are dangerous and gloss over what they are actually doing. Looking at the original question that was asked about removing an item from the slice a copy of the slice is being made and then it's being filled. This ensures that as the slices are passed around your program you don't introduce subtle bugs.
Here is some code comparing users answers in this thread and the original post. Here is a go playground to mess around with this code in.
Append based removal
package main
import (
"fmt"
)
func RemoveIndex(s []int, index int) []int {
return append(s[:index], s[index+1:]...)
}
func main() {
all := []int{0, 1, 2, 3, 4, 5, 6, 7, 8, 9}
fmt.Println("all: ", all) //[0 1 2 3 4 5 6 7 8 9]
removeIndex := RemoveIndex(all, 5)
fmt.Println("all: ", all) //[0 1 2 3 4 6 7 8 9 9]
fmt.Println("removeIndex: ", removeIndex) //[0 1 2 3 4 6 7 8 9]
removeIndex[0] = 999
fmt.Println("all: ", all) //[999 1 2 3 4 6 7 9 9]
fmt.Println("removeIndex: ", removeIndex) //[999 1 2 3 4 6 7 8 9]
}
In the above example you can see me create a slice and fill it manually with numbers 0 to 9. We then remove index 5 from all and assign it to remove index. However when we go to print out all now we see that it has been modified as well. This is because slices are pointers to an underlying array. Writing it out to removeIndex causes all to be modified as well with the difference being all is longer by one element that is no longer reachable from removeIndex. Next we change a value in removeIndex and we can see all gets modified as well. Effective go goes into some more detail on this.
The following example I won't go into but it does the same thing for our purposes. And just illustrates that using copy is no different.
package main
import (
"fmt"
)
func RemoveCopy(slice []int, i int) []int {
copy(slice[i:], slice[i+1:])
return slice[:len(slice)-1]
}
func main() {
all := []int{0, 1, 2, 3, 4, 5, 6, 7, 8, 9}
fmt.Println("all: ", all) //[0 1 2 3 4 5 6 7 8 9]
removeCopy := RemoveCopy(all, 5)
fmt.Println("all: ", all) //[0 1 2 3 4 6 7 8 9 9]
fmt.Println("removeCopy: ", removeCopy) //[0 1 2 3 4 6 7 8 9]
removeCopy[0] = 999
fmt.Println("all: ", all) //[99 1 2 3 4 6 7 9 9]
fmt.Println("removeCopy: ", removeCopy) //[999 1 2 3 4 6 7 8 9]
}
The questions original answer
Looking at the original question it does not modify the slice that it's removing an item from. Making the original answer in this thread the best so far for most people coming to this page.
package main
import (
"fmt"
)
func OriginalRemoveIndex(arr []int, pos int) []int {
new_arr := make([]int, (len(arr) - 1))
k := 0
for i := 0; i < (len(arr) - 1); {
if i != pos {
new_arr[i] = arr[k]
k++
} else {
k++
}
i++
}
return new_arr
}
func main() {
all := []int{0, 1, 2, 3, 4, 5, 6, 7, 8, 9}
fmt.Println("all: ", all) //[0 1 2 3 4 5 6 7 8 9]
originalRemove := OriginalRemoveIndex(all, 5)
fmt.Println("all: ", all) //[0 1 2 3 4 5 6 7 8 9]
fmt.Println("originalRemove: ", originalRemove) //[0 1 2 3 4 6 7 8 9]
originalRemove[0] = 999
fmt.Println("all: ", all) //[0 1 2 3 4 5 6 7 8 9]
fmt.Println("originalRemove: ", originalRemove) //[999 1 2 3 4 6 7 8 9]
}
As you can see this output acts as most people would expect and likely what most people want. Modification of originalRemove doesn't cause changes in all and the operation of removing the index and assigning it doesn't cause changes as well! Fantastic!
This code is a little lengthy though so the above can be changed to this.
A correct answer
package main
import (
"fmt"
)
func RemoveIndex(s []int, index int) []int {
ret := make([]int, 0)
ret = append(ret, s[:index]...)
return append(ret, s[index+1:]...)
}
func main() {
all := []int{0, 1, 2, 3, 4, 5, 6, 7, 8, 9}
fmt.Println("all: ", all) //[0 1 2 3 4 5 6 7 8 9]
removeIndex := RemoveIndex(all, 5)
fmt.Println("all: ", all) //[0 1 2 3 4 5 6 7 8 9]
fmt.Println("removeIndex: ", removeIndex) //[0 1 2 3 4 6 7 8 9]
removeIndex[0] = 999
fmt.Println("all: ", all) //[0 1 2 3 4 5 6 7 9 9]
fmt.Println("removeIndex: ", removeIndex) //[999 1 2 3 4 6 7 8 9]
}
Almost identical to the original remove index solution however we make a new slice to append to before returning.
Solution 3:[3]
Remove one element from the Slice (this is called 're-slicing'):
package main
import (
"fmt"
)
func RemoveIndex(s []int, index int) []int {
return append(s[:index], s[index+1:]...)
}
func main() {
all := []int{0, 1, 2, 3, 4, 5, 6, 7, 8, 9}
fmt.Println(all) //[0 1 2 3 4 5 6 7 8 9]
all = RemoveIndex(all, 5)
fmt.Println(all) //[0 1 2 3 4 6 7 8 9]
}
Solution 4:[4]
Minor point (code golf), but in the case where order does not matter you don't need to swap the values. Just overwrite the array position being removed with a duplicate of the last position and then return a truncated array.
func remove(s []int, i int) []int {
s[i] = s[len(s)-1]
return s[:len(s)-1]
}
Same result.
Solution 5:[5]
This is how you Delete From a slice the idiomatic way. You don't need to build a function it is built into the append. Try it here https://play.golang.org/p/QMXn9-6gU5P
z := []int{9, 8, 7, 6, 5, 3, 2, 1, 0}
fmt.Println(z) //will print Answer [9 8 7 6 5 3 2 1 0]
z = append(z[:2], z[4:]...)
fmt.Println(z) //will print Answer [9 8 5 3 2 1 0]
Solution 6:[6]
From the book The Go Programming Language
To remove an element from the middle of a slice, preserving the order of the remaining elements, use copy to slide the higher-numbered elements down by one to fill the gap:
func remove(slice []int, i int) []int { copy(slice[i:], slice[i+1:]) return slice[:len(slice)-1] }
Solution 7:[7]
The best way to do it is to use the append function:
package main
import (
"fmt"
)
func main() {
x := []int{4, 5, 6, 7, 88}
fmt.Println(x)
x = append(x[:2], x[4:]...)//deletes 6 and 7
fmt.Println(x)
}
Solution 8:[8]
I take the below approach to remove the item in slice. This helps in readability for others. And also immutable.
func remove(items []string, item string) []string {
newitems := []string{}
for _, i := range items {
if i != item {
newitems = append(newitems, i)
}
}
return newitems
}
Solution 9:[9]
Using Delete from the slices package (experimental as of Go 1.18, planned to be stable in Go 1.19):
slice := []int{1, 2, 3, 4}
slice = slices.Delete(slice, 1, 2)
fmt.Println(slice) // [1 3 4]
slices.Delete(s, i, j) removes the elements s[i:j] from s.
Note two things:
Deletemodifies the contents of the original slice- Still, you need to reassign
slicebecause otherwise it would have the wrong length
Solution 10:[10]
The currently most voted answer by T. Claverie is correct but I find the algorithm more clear if swap is performed only if needed, i.e. for all but the last element of the slice. This can be achieved by a simple if guard.
Order is not important/ no boundary checks perfomed
func remove(s []int, i int) []int {
// bring element to remove at the end if its not there yet
if i != len(s)-1 {
s[i] = s[len(s)-1]
}
// drop the last element
return s[:len(s)-1]
}
Solution 11:[11]
Find a way here without relocating.
- changes order
a := []string{"A", "B", "C", "D", "E"}
i := 2
// Remove the element at index i from a.
a[i] = a[len(a)-1] // Copy last element to index i.
a[len(a)-1] = "" // Erase last element (write zero value).
a = a[:len(a)-1] // Truncate slice.
fmt.Println(a) // [A B E D]
- keep order
a := []string{"A", "B", "C", "D", "E"}
i := 2
// Remove the element at index i from a.
copy(a[i:], a[i+1:]) // Shift a[i+1:] left one index.
a[len(a)-1] = "" // Erase last element (write zero value).
a = a[:len(a)-1] // Truncate slice.
fmt.Println(a) // [A B D E]
Solution 12:[12]
Maybe you can try this method:
// DelEleInSlice delete an element from slice by index
// - arr: the reference of slice
// - index: the index of element will be deleted
func DelEleInSlice(arr interface{}, index int) {
vField := reflect.ValueOf(arr)
value := vField.Elem()
if value.Kind() == reflect.Slice || value.Kind() == reflect.Array {
result := reflect.AppendSlice(value.Slice(0, index), value.Slice(index+1, value.Len()))
value.Set(result)
}
}
Usage:
arrInt := []int{0, 1, 2, 3, 4, 5}
arrStr := []string{"0", "1", "2", "3", "4", "5"}
DelEleInSlice(&arrInt, 3)
DelEleInSlice(&arrStr, 4)
fmt.Println(arrInt)
fmt.Println(arrStr)
Result:
0, 1, 2, 4, 5
"0", "1", "2", "3", "5"
Solution 13:[13]
Using generics you can pass any type of slice.
// Removes slice element at index(s) and returns new slice
func remove[T any](slice []T, s int) []T {
return append(slice[:s], slice[s+1:]...)
}
Usage
slice := []int{1, 2, 3, 4}
result := remove(slice, 0)
fmt.Println(result)
// [2 3 4]
Solution 14:[14]
Maybe this code will help.
It deletes item with a given index.
Takes the array, and the index to delete and returns a new array pretty much like append function.
func deleteItem(arr []int, index int) []int{
if index < 0 || index >= len(arr){
return []int{-1}
}
for i := index; i < len(arr) -1; i++{
arr[i] = arr[i + 1]
}
return arr[:len(arr)-1]
}
Here you can play with the code : https://play.golang.org/p/aX1Qj40uTVs
Solution 15:[15]
To remove an element from the middle of a slice, preserving the order of the remaining elements, use copy to slide the higher-numbered elements down by one to fill the gap:
func remove(slice []int, i int) []int { copy(slice[i:], slice[i+1:]) return slice[:len(slice)-1] }
If it is not necessary to preserve the order, we can simply move the last element to the gap.
func remove(slice []int, i int) []int { slice[i] = slice[len(slice)-1] return slice[:len(slice)-1] }
Solution 16:[16]
In the language tutorial we learn that:
Slices are like references to arrays. A slice does not store any data, it just describes a section of an underlying array. Changing the elements of a slice modifies the corresponding elements of its underlying array.
For this reason, working with the append function on slices without taking care of the origin and destination of the values we are dealing with is very dangerous as well as wrong for the Go philosophy.
The correct solution is therefore to work with a slice referenced to a new array and not the "main" one.
This is possible by creating a new slice through the make construct.
func removeAt(slice []int, index int) []int {
newSlice := make([]int, 0) //Create a new slice of type []int and length 0
newSlice = append(newSlice, slice[:index]...) //Copies the values contained in the old slice to the new slice up to the index (excluded)
if index != len(slice)-1 {
newSlice = append(newSlice, slice[index+1:]...) //If the index to be removed was different from the last one, then proceed to copy the following values of the index to the end of the old slice
}
return newSlice
}
In this way we are able to safely remove an element of a slice, regardless of the use we will make on the return of the function.
Since I used a function to answer the question, it would be a good idea to handle any errors as follows:
func removeAt(slice []int, index int) ([]int, error) {
if index < 0 {
return nil, fmt.Errorf("index (%d) cannot be a negative number", index)
}
if index >= len(slice) {
return nil, fmt.Errorf("index (%d) cannot be a number greater or equal than the length of slice (%d)", index, len(slice))
}
newSlice := make([]int, 0)
newSlice = append(newSlice, slice[:index]...)
if index != len(slice)-1 {
newSlice = append(newSlice, slice[index+1:]...)
}
return newSlice, nil
}
Or better yet, implement the function that can handle multiple types through interfaces. However, all this is a good practice since you build a function to do this, which does not concern the question posed.
However, an example of a test on the Go playground can be found here.
Solution 17:[17]
No need to check every single element unless you care contents and you can utilize slice append. try it out
pos := 0
arr := []int{1, 2, 3, 4, 5, 6, 7, 9}
fmt.Println("input your position")
fmt.Scanln(&pos)
/* you need to check if negative input as well */
if (pos < len(arr)){
arr = append(arr[:pos], arr[pos+1:]...)
} else {
fmt.Println("position invalid")
}
Solution 18:[18]
Delete
a = append(a[:i], a[i+1:]...)
// or
a = a[:i+copy(a[i:], a[i+1:])]
Delete without preserving order
a[i] = a[len(a)-1]
a = a[:len(a)-1]
NOTE If the type of the element is a pointer or a struct with pointer fields, which need to be garbage collected, the above implementations of Cut and Delete have a potential memory leak problem: some elements with values are still referenced by slice a and thus can not be collected. The following code can fix this problem:
Delete
copy(a[i:], a[i+1:])
a[len(a)-1] = nil // or the zero value of T
a = a[:len(a)-1]
Delete without preserving order
a[i] = a[len(a)-1]
a[len(a)-1] = nil
a = a[:len(a)-1]
Solution 19:[19]
You need to change your code a little bit,
new_arr := make([]int, (len(arr) - 1))
for i := 0; i < len(arr); i++ {
if i != pos {
new_arr = append(new_arr, arr[i])
}
}
For a more efficient loop you can use this
for i, item := range arr {
...
}
At last you can do it by using native slice functionality
new_arr = append(arr[:2], arr[3:])
The last solution remove element in the index 2 and put the new slice in new_arr.
Sources
This article follows the attribution requirements of Stack Overflow and is licensed under CC BY-SA 3.0.
Source: Stack Overflow